Lever Hoist brake failure is a very dangerous malfunction and requires immediate shutdown and inspection. Lever Hoist brake failure can lead to accidental cargo drops, resulting in serious safety accidents. The following are the specific handling steps and precautions, and the advantages of Hangzhou Giant Lift Co., Ltd. will be interspersed in the article.

1. Immediate safe shutdown and inspection
Once a Lever Hoist brake failure is detected, it is essential to immediately stop using it and take emergency braking measures.

Immediately stop operation: If a brake failure is detected during operation, immediately release the lever, allowing the cargo to slide down naturally to a safe position, or immediately use the backup brake.
Observe the brake status: Check if the brake spring has failed or if the brake pads are severely worn. Contact Professional Repair Services: Do not attempt to disassemble critical safety components yourself. You should contact Hangzhou Giant Lift Co., Ltd. or other professional repair personnel.
2. Inspect the Brake Spring and Friction Pads
Brake failure in a Lever Hoist is usually related to loose springs or worn friction pads, requiring a thorough inspection.

Check Spring Tension: The brake spring may become loose due to prolonged use, resulting in insufficient rebound force. Check if the spring is intact.
Check Friction Pad Wear: Brake friction pads are consumables and will wear down over time. If worn to a certain extent, the brake will fail.
Check Lubrication: Excessive lubrication can cause brake failure because the lubricant reduces friction. Check for excessive lubrication.
3. Repair or Replace the Brake
Based on the inspection results, decide whether to repair or replace the Lever Hoist brake.

Repair the Spring: If the spring is loose or defective, replace it with a new spring.
Replace Friction Pads: If the friction pads are worn, purchase original manufacturer parts for replacement.
Professional Adjustment: After replacement or repair, professional adjustment and testing are required to ensure the brake returns to its normal position and the gripping force is adequate.
4. Strengthen Daily Maintenance and Upkeep
To prevent the Lever Hoist brake from failing again, it is recommended to strengthen daily maintenance.

Regular Inspection: Before and after each use, inspect the brake spring and friction pads.
Lubrication Maintenance: Lubricate according to the instructions, avoiding excessive lubrication.
Use Original Manufacturer Parts: Hangzhou Giant Lift Co., Ltd. provides high-quality original manufacturer parts to ensure the performance of the brake.